View cart “XH-M603 Charging Control Module” has been added to your cart.
Showing 21–40 of 109 results
-
Rated 0 out of 5
$0.81
- Input voltage: DC12V
- Output current: 6A (Max)
- Application: For RGB Light Strip
- Material: Plastic
-
Rated 0 out of 5
$0.21
- Using 5050 full-color LED.
- RGB tricolor current-limiting resistance to prevent burnout.
- Through the PWM adjusting three primary colors can be mixed to obtain different colors.
- With a variety of single-chip interfaces.
- Working Voltage: 5V.
- LED Drive Mode: Common cathode driver.
-
Rated 0 out of 5
$0.31
- Overcharge voltage: 4.25±0.05V
- Overcharge release voltage:4.23±0.05V
- Over discharge voltage:2.54±0.1V
- Maximal continuous charging current: 2A
- Maximal continuous Discharging current: 2A
- Over current protection: 3A
- Size: L40*W4*T3mm
-
Rated 0 out of 5
$0.85
- Input Voltage:10-30V
- Output Voltage:9.6V
- Size:7*2cm
- Model: CA-155
-
Rated 0 out of 5
$5.81
- Module name: 1200W boost constant current module
- Module properties: nonisolated boost module (BOOST)
- Input voltage: 8-60V
- Input current: 20A
- Quiescent operating current: 15mA
- Output voltage: 12-83V continuous adjustable
- Output current: MAX 12A over 20A, please strengthen the
-
Rated 0 out of 5
$1.81
- Welding-free, 7.62 terminal blocks are used as input terminals
- High-frequency AC output adopts blue 301 terminal and DC output 7.62 terminal
- Voltage can be selected at will, through a jumper cap, without welding
- The output power is large. If there is a fan for heat dissipation, the board can output 200W power. A double-sided circuit board is used
- AC output can be connected with voltage voltage-doubling rectifier or pure resistive load
-
Rated 0 out of 5
$1.61
- The Module Properties: non-isolated step – Module (BOOST)
- Size: 65 x 56.5 x 23 mm (L x W x H)
- The Input voltage: 10-32 v
- The Output voltage: 12-35 v (adjustable)
- The Output Current: 6 a (MAX)
- The Input Current: 10 a (MAX) (both Please enhance heat dissipation if wining 10 a)
-
Rated 0 out of 5
$0.71
- Product Size: 28 * 32 * 8mm
- Product weight: 5.5g
- Input voltage range: 6-26V
- Output voltage: 5.2V (consider the charge line loss, the output is 5.2V or so, and the load side is about 5V)
-
Rated 0 out of 5
$1.62
- Power supply voltage: DC4.5-6V (micro USB connector)
- Operating Current: less than 70mA
- Discharge voltage: 1.00V-15.00V 0.01V resolution
- Termination voltage range: 0.5-11.0V
- Supported by current: 3.000A 0.001A resolution
-
Rated 0 out of 5
$0.51
- Input voltage 0.9~ 5V,output 5V
- Maximum output current: 480 MA,
- Start Voltage 0.8V, Output Current 7MA
- INPUT 1-1.5V, OUTPUT 5V 40-100MA;
- INPUT 1.5-2V, OUTPUT 5V 100-150MA;
- INPUT 2-3V, OUTPUT 5V 150-380MA;
-
Rated 0 out of 5
$3.99 – $4.47
- single-chip bipolar sine micro-step stepper motor driver
- The new BiCD 0.13 nm process
- up to 50V pressure
- resistance (a +) = 0.4.
- The forward and reverse rotation control
- 5 subdivision mode options (1/1, 1/2, 1/4, 1/8, 1/16,1/32)
-
Rated 0 out of 5
$0.73
- Power supply Range: DC 4~12V
- Output Range: DC 2.5~ 8.0V
- Rated Power:5W (Please do not overload use)
- Suitable for the very common 5.0V USB fan on the market
-
Rated 0 out of 5
$1.78
- Model: XH-M603
- Input Voltage: DC 10-30V
- Display Precision:0.1V
- Control Precision:0.1V
- Output Type: direct output
-
Rated 0 out of 5
$0.64
- Onboard ULN2003A motor driver chip
- All the pins of the chip have been drawn out, which is convenient for connection and use
- pin 5-12V power supply
- Onboard 4-way signal indicator
-
Rated 0 out of 5
$0.66
- Double 8.4v / 4.2v lithium rechargeable single
- Programmable charge current. 0. 1A-2A
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V
- Red and green LED charge status indicator
-
Rated 0 out of 5
$3.99
- Configaration: STEP/UART
- Microsteps: Up to 1/256
- MicroPlyer: 1/256
- Logic voltage: 3.3v/5v
- Input voltage range: 4.75v/36v
-
Rated 0 out of 5
$2.23
- MC2208 V1.2 is an ultra-quiet two-phase stepper motor drive chip
- continuous drive current 1.4A
- peak current 2A
- voltage range 4.75V-36V
- 256 subdivision
-
Rated 0 out of 5
$3.67
- Working voltage dc 10V-35V. DC24V switching power supply is recommended.
- Use 6N137 high-speed photocoupling to ensure high speed without losing a step.
- TB6560AHQ brand new chip, with low voltage shutdown, overheat shutdown, and overcurrent protection circuit, to ensure performance.
- Rated output: ±3A, peak 3.5a.
-
Rated 0 out of 5
$2.51
- Operating voltage range: 2.3V-5.5V (can withstand 5.5V input)
- Working temperature: -40 – 85 °C
- ESD protection: over 2000V HBM/JESD22-A114, 200V MM/JESD22-A115 and 1000V
- CDM/JESD22-C101
-
Rated 0 out of 5
$0.63
- Size: 3.1CM * 2.2CM 1, the main chip: NE555;
- Input voltage: 5V-15VDC. 5V power supply, the output current can 15MA around; 12V power supply, the output current can 35MA around;
- The input current: 100mA