Showing 41–60 of 127 resultsSorted by latest
-
$0.31
- Overcharge voltage: 4.25±0.05V
- Overcharge release voltage:4.23±0.05V
- Over discharge voltage:2.54±0.1V
- Maximal continuous charging current: 2A
- Maximal continuous Discharging current: 2A
- Over current protection: 3A
- Size: L40*W4*T3mm
-
$0.85
- Input Voltage:10-30V
- Output Voltage:9.6V
- Size:7*2cm
- Model: CA-155
-
$5.81
- Module name: 1200W boost constant current module
- Module properties: nonisolated boost module (BOOST)
- Input voltage: 8-60V
- Input current: 20A
- Quiescent operating current: 15mA
- Output voltage: 12-83V continuous adjustable
- Output current: MAX 12A over 20A, please strengthen the
-
$3.31
- Welding-free, 7.62 terminal blocks are used as input terminals
- High-frequency AC output adopts blue 301 terminal and DC output 7.62 terminal
- Voltage can be selected at will, through a jumper cap, without welding
- The output power is large. If there is a fan for heat dissipation, the board can output 200W power. A double-sided circuit board is used
- AC output can be connected with voltage voltage-doubling rectifier or pure resistive load
-
$1.61
- The Module Properties: non-isolated step – Module (BOOST)
- Size: 65 x 56.5 x 23 mm (L x W x H)
- The Input voltage: 10-32 v
- The Output voltage: 12-35 v (adjustable)
- The Output Current: 6 a (MAX)
- The Input Current: 10 a (MAX) (both Please enhance heat dissipation if wining 10 a)
-
$0.71
- Product Size: 28 * 32 * 8mm
- Product weight: 5.5g
- Input voltage range: 6-26V
- Output voltage: 5.2V (consider the charge line loss, the output is 5.2V or so, and the load side is about 5V)
-
$1.62
- Power supply voltage: DC4.5-6V (micro USB connector)
- Operating Current: less than 70mA
- Discharge voltage: 1.00V-15.00V 0.01V resolution
- Termination voltage range: 0.5-11.0V
- Supported by current: 3.000A 0.001A resolution
-
$0.51
- Input voltage 0.9~ 5V,output 5V
- Maximum output current: 480 MA,
- Start Voltage 0.8V, Output Current 7MA
- INPUT 1-1.5V, OUTPUT 5V 40-100MA;
- INPUT 1.5-2V, OUTPUT 5V 100-150MA;
- INPUT 2-3V, OUTPUT 5V 150-380MA;
-
$3.99 – $4.47Price range: $3.99 through $4.47
- single-chip bipolar sine micro-step stepper motor driver
- The new BiCD 0.13 nm process
- up to 50V pressure
- resistance (a +) = 0.4.
- The forward and reverse rotation control
- 5 subdivision mode options (1/1, 1/2, 1/4, 1/8, 1/16,1/32)
-
$0.73
- Power supply Range: DC 4~12V
- Output Range: DC 2.5~ 8.0V
- Rated Power:5W (Please do not overload use)
- Suitable for the very common 5.0V USB fan on the market
-
$1.78
- Model: XH-M603
- Input Voltage: DC 10-30V
- Display Precision:0.1V
- Control Precision:0.1V
- Output Type: direct output
-
$0.64
- Onboard ULN2003A motor driver chip
- All the pins of the chip have been drawn out, which is convenient for connection and use
- pin 5-12V power supply
- Onboard 4-way signal indicator
-
$0.66
- Double 8.4v / 4.2v lithium rechargeable single
- Programmable charge current. 0. 1A-2A
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V
- Red and green LED charge status indicator
-
$3.99
- Configaration: STEP/UART
- Microsteps: Up to 1/256
- MicroPlyer: 1/256
- Logic voltage: 3.3v/5v
- Input voltage range: 4.75v/36v
-
$2.23
- MC2208 V1.2 is an ultra-quiet two-phase stepper motor drive chip
- continuous drive current 1.4A
- peak current 2A
- voltage range 4.75V-36V
- 256 subdivision
-
$3.67
- Working voltage dc 10V-35V. DC24V switching power supply is recommended.
- Use 6N137 high-speed photocoupling to ensure high speed without losing a step.
- TB6560AHQ brand new chip, with low voltage shutdown, overheat shutdown, and overcurrent protection circuit, to ensure performance.
- Rated output: ±3A, peak 3.5a.
-
$2.51
- Operating voltage range: 2.3V-5.5V (can withstand 5.5V input)
- Working temperature: -40 – 85 °C
- ESD protection: over 2000V HBM/JESD22-A114, 200V MM/JESD22-A115 and 1000V
- CDM/JESD22-C101
-
$0.63
- Size: 3.1CM * 2.2CM 1, the main chip: NE555;
- Input voltage: 5V-15VDC. 5V power supply, the output current can 15MA around; 12V power supply, the output current can 35MA around;
- The input current: 100mA
-
$0.51
- A dual H-bridge motor driver can drive two DC motors or a 4-wire two-phase stepper motor;
- The module supply voltage is 2V-10V;
- Signal input voltage 1.8-7V;
- Single Operating current 1.5A, peak current up to 2.5A, low standby current (less than 0.1uA);
-
$15.86
Thank you for visiting our product page! We strive to provide you with an effortless shopping experience. Our checkout process is simple and offers various shipping options with tracking. Furthermore, we believe in maximizing the value of your purchase. On this website, you can find detailed instructions on how to use this product and explore…
