Mini L298N driver board module

Description

Thank you for visiting our product page! We strive to provide you with an effortless shopping experience. Our checkout process is simple and offers various shipping options with tracking.

Furthermore, we believe in maximizing the value of your purchase. On this website, you can find detailed instructions on how to use this product and explore various projects we have created using it. These resources are designed to help you make the most of your purchase.

• How to use this product — Click on me
  
• Free projects and tutorials — Click on me

If you have any questions or encounter any issues, our dedicated customer support team is always ready to assist you. Please don’t hesitate to reach out to us through our user-friendly Contact Us page. We are committed to ensuring your complete satisfaction.

Lastly, we highly value your feedback. Once you have experienced our product, we would greatly appreciate it if you could leave a review. Your opinion matters to us!

Thank you for considering our product. We look forward to serving you.

Product details

Product Highlights

• Use of imported original chip, built-in low on-resistance MOS switch, minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered.
  (L298N internal transistor switch, low efficiency, high fever, need to add heat sink, bulky, L298N very easy to burn)
• Dual 1.5A * 2, the peak current to be 2.5A, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped.
• Small size, lightweight, and 0 standby current, is the ideal choice for your car model.

Product parameters

• A dual H-bridge motor driver can drive two DC motors or a 4-wire two-phase stepper motor;
• The module supply voltage is 2V-10V;
• Signal input voltage 1.8-7V;
• Single Operating current 1.5A, peak current up to 2.5A, low standby current (less than 0.1uA);
• Built-in common conduction circuit, when the input pin is left floating, the motor does not malfunction;
• Built-in thermal protection circuit with hysteresis effects (TSD), without worrying about motor stall;
• Product Size: 24.7 * 21 * 5mm (length, width, height), ultra-small size;
• The mounting hole diameter: is 2 mm.
• Weight: 5g

Precautions

• Power positive and negative reversed will certainly cause damage to the circuit.
• Output is shorted to ground or output short circuit, and the motor stall, the chip will heat protection, but in the near or exceeding 10V voltage and the peak current is greater than 2.5A situation can also cause chip burned.