How to make a simple DIY motorboat at home
Hello, In this tutorial, we will learn how to make a simple DIY motorboat at home. Also, this boat is mainly powered by a 9v battery and two motors in the CD ROM. Here the body is created using rigiform. So, you can easily make it at home. Also, no programming knowledge is required for the creations in this series of tutorials. This includes creations that anyone can easily make.
OK, let’s make this boat step by step. The required components are given below.
- Rigifoam
- Motor x 2
- 9v battery and clip x 1
- Popsicle sticks
- Pully x 4
- Rubber band x 2
- Iron rod
- Iron lid
- Wires
Step 1
Firstly, identify these components.
Rigifoam 
Motors 
9v battery and clip 
Popsicle sticks 
Pullys 
Rubber bands 
Iron rod 
Iron lid
Step 2
Secondly, cut the rigifoam as the boat shape.
Step 3
Thirdly, glue the popsicle sticks as follows.
Step 4
Then, dig a hole in the middle popsicle stick.
Step 5
Next, glue another popsicle stick and dig a hole in the middle.
Step 6
OK, now create a propeller using an iron lid. Then, dig a hole in it. For that, use the pictures below.
Step 7
Then connect this propeller and two small pulleys to the iron rod. After, connect it to the boat. Also, put the rubber bands on the iron rod.
Step 8
Next, connect the two motors to either side of the boat.
Step 9
Now, connect the pulleys to these motors and put the rubber bands from the small pulley to the large pulley.
Step 10
Now, connect the wires and battery clip to these motors. For that, use the circuit diagram below.
Step 11
Okay, finally connect the 9v battery and have fun with this boat. The full video guide is given below. So, we will meet in the next tutorial.
How to make a simple DIY motorboat at home
