Hello and welcome back. In this project, we will learn how to assemble an RC LEGO walking machine step by step. For that, I have used several LEGO parts. This project is perfect for both beginners and LEGO enthusiasts, and you’ll be amazed at what you can create with just a few LEGO parts. If you want to learn more info about LEGO, please read this article.
OK, let’s do this project step by step. The required parts are given below.
- LEGO Transmitter and Receiver —
- LEGO gear motor x 1 —
- LEGO wheel x 2 —
- LEGO Gear with 40 Teeth x 1 —
- LEGO Beam Frame (5 x 7) x 3 —
- LEGO Beam 3 x 3.8 x 7 Beam Bent 45 Double x 2 —
- LEGO Beam (9) x 2 —
- LEGO Beam (5) x 4 —
- LEGO Axle x 3 —
- LEGO Worm Gear with Old Axle x 1 —
- LEGO Technic Hole with Pin x 3 —
- LEGO Pin without Friction Ridges x 6 —
- LEGO Axle to Pin Connector x 2 —
- LEGO Half Bushing x 5 —
- LEGO Beam (7) x 4 —
- LEGO Beam (13) x 2 —
- LEGO Technic Pin with Short Friction Ridges x 24 —
Firstly, identify these parts.
Secondly, connect the four LEGO pins(With Friction Ridges) to the LEGO beam (13). Then, connect the LEGO beam (5) to these pins.
Thirdly, connect the LEGO gear motor to it. For that, use the LEGO pins(With Friction Ridges).
Next, connect two LEGO beams (5) to the front of this structure. Then, connect three LEGO Pins(Technic Hole) to them.
Now, connect the Worm Gear. For that, use the LEGO axle and Half Bushing. Then, connect the two LEGO beams (7) to the front of this machine.
Next, connect the LEGO frame to the top of the gear motor and connect two LEGO beams (7) to it.
Then, connect the LEGO gear wheel using a LEGO axle. Also, lock this axle using two Half Bushing. After, connect the LEGO frames to the bottom of this machine.
OK, now connect the LEGO wheels to this machine. For that, use the LEGO axle and Half Bushing. Then, connect LEGO Beam Bents to the end of the LEGO gear wheel axle.
Next, connect two LEGO beams (9) to the end of LEGO beam bents. Then, place the Battery box on top of this machine.
Finally, connect the motor to the battery box and power on it. Then, power on the remote and enjoy this project. The full video guide is below. So, we hope to see you in the next project or tutorial.