Showing 21–40 of 60 resultsSorted by latest
-


$0.52
- a sensor with external resistors full bridge measurement range of a sensor range: of 50kg. Higher requirements for external resistor
- the use of only two full-bridge sensors measuring range is the range of the two sensors and: 50kgx2 = 100kg
- the use of four full-bridge sensors measuring range is the range of four sensors and: 50kgx4 = 200kg
-


$0.71
- Maximum power: 6W
- Maximum switching voltage: 60VDC/VAC
- High voltage resistance: 60VDC/VAC
- Maximum switching current: 0.25A
- Maximum load current: 0.5A
- Maximum contact resistance: 115M
- Minimum insulation resistance: 2×107/ 2×109
-


$0.71
1. Input/Output: DC 6-20V(support voltage stabilization power)
2.Driviing Current:3A
3. Standby Current:6MA
4. Board Size:24*32*1.6mm
5. Feature: can set latch, sensitivity can be adjustable
-


$0.31
- Measurement range: -20 to 105 °C
- Length of wire: 1 meter
- Size of probe: 5 x 25 mm
- Output: 2 wires
- Type: NTC 10k±1% 3950
- B-constant: 3380K ±1%
- Typical Dissipation Constant 5mW/ °C
- Probe insulation: >100M Ohm
- Peak Voltage sustain time: 2 seconds, AC1800V 1mA 2 seconds
- Stress sustain: 9.8N (1kgF) for 1 minute no deformation
-


$0.85
- Model: Tracking Sensor Module
- Working voltage:5V
- Channel: 8-channel
- PCB Color: Red
-


$1.31
1. Using the chip: 74HC14D
2. Working voltage: 3.3V-5V
3. Output mode: digital signal
4. Measuring distance: 1CM-1.5CM
5. Detection probe: TCRT5000L
6. Detection signal: detect black line output low level, detect white line is high level, output low level beyond the detection range
7. LED status: detect black line LED off, detect white line LED is bright
-


$2.31
- Small size and easy to use
- Low voltage and low power consumption
- High measurement accuracy
- Strong anti-interference
- Integrated closed waterproof probe with wire, suitable for wet and harsh measurement occasions
-


$0.48
- The module installation forefront of collision, the module output is low, there is no collision, and the output is high.
- Module reserved M3 mounting holes for easy fixing in a small car.
- Module size: 2.5cm * 1.9cm.
-


$1.91
- Operating voltage: 3.3v/5v
- Output signal: analog signal
- Output signal size: 0~3.3v / 0~5v
- Current size: ~4ma(under 5v)
-


$6.85
- Resolution: 500dpi
- Supply current: <60mA
- Supply voltage: DC 3.3V
- Fingerprint image entry time: <1.0 seconds
-


$0.51
- Working voltage: 3.3V~5V
- 5mm Groove width
- Using wide voltage LM393 comparator
- Output form: Digital switch output (0 and 1)
-


$1.41
- Build-in TCRT5000 sensor
- Number of channels : 3
- Work Power : 5VDC
- Detector distance:10MM
-


$1.31
- Gas Detection: Detects alcohol vapors in the air
- Sensing Principle: Semiconductor-based gas sensing technology
- Operating Voltage: 5V DC
-


$1.16
- Gas Detection: Detects flammable gases like LPG, propane, hydrogen, methane, and other combustible gases, as well as carbon monoxide (CO)
- Sensing Principle: Semiconductor-based gas sensing technology
- Operating Voltage:5V DC
-


$0.22
- Input voltage range: DC0-25V
- Voltage detection range: DC0.02445V-25V
- Voltage analog resolutions: 0.00489V
-


$0.23
- Sensor Type: Capacitive touch sensor
- Operating Voltage: Typically 2.5V to 5.5V
- Sensing Method: Capacitance measurement
- Touch Detection: Detects touch or proximity without physical buttons
-


$0.48
- Sensor Type: Tilt and vibration sensor
- Operating Voltage: Typically 3.3V to 5V
- Sensivity switch: SW-520D
- Sensing Method: Ball switch or similar mechanism
-


$0.48
- Sensor Type: Sound detection sensor
- Operating Voltage: Typically 3.3V to 5V
- working voltage: 3.3 V
-


$0.52
- Sensor Type: Reed switch-based magnetic sensor
- working voltage of 3.3V-5V
- Sensing Method: Magnetic field detection using a Reed switch
-


$0.31
- Sensor Type: LDR (Light-Dependent Resistor) or Photoresistor
- Resistance Range: Varies based on the specific LDR and lighting conditions
- Dark Resistance: Typically in the range of megaohms (MΩ)