How does a 7 segment display work | Arduino with 7 segment display | Step by Step instructions
How does a 7 segment display work
Hello, welcome back. This tutorial includes, what is the seven-segment display and how does a 7 segment display work with Arduino. Also, these displays are called Seven segment displays because they are made up of seven parts. We can see this display in devices like alarm clocks, toys, counting systems, scoreboards. We can use this display to display characters from 0 to 9 and from A to Z. This tutorial explains step by step the functionality of this seven-segment display and how to use it with Arduino. I also believe that this knowledge will be more useful for your projects.
What is a seven-segment display?
This display is called Seven segment display as it is made up of seven parts. It also has seven LEDs for the seven parts and one LED bulb for the decimal point. In terms of LED color, we can see these in red, blue, and orange in the market. Also, the LEDs in these seven parts are labeled a to g. Also known as the decimal point DP.
Each of these LEDs has two pins. One of these pins is considered to be the common pin and all eight LEDs combine to form a common pin. We can light these ones by one through the other eight PINs. According to the common pin, there are two types of these displays.
1.Common cathode Display
Here the common terminal is taken as the cathode. That is, the negative PINs of all eight LEDs are connected together. A negative voltage must be applied to this PIN. Also, by applying a separate positive voltage to the other eight terminals, we can turn LEDs on by one.
2.Common anode display
Here the positive pins of all eight LEDs are connected together. A positive voltage must be supplied to the common pin. Also, the parts can be lit one by one by supplying negative voltages to the other eight pins.
PIN structure of this Display
OK, let’s learn how to use this display with Arduino step by step. To do this, the required components are given below.
Hello friends, and welcome back to the “SriTu Hobby” blog. Today we will learn how to use the Rain sensor with Arduino UNO board. We can understand the function of…
Hello and welcome back. In this project, we will learn how to make a mini solar-powered car step by step. For that, I used a mini solar-powered car kit. But,…
Hello and welcome back. In this project, we will learn how to make a DIY digital ruler with an Arduino Nano board. It’s most suitable for DIY projects, woodworking, crafting,…
Hello and welcome back. In this tutorial, we will learn how to install Raspberry Pi OS on the Raspberry Pi board. For that, I used the Raspberry Pi 2 Model…
Hello and Welcome back! In this project, you’ll learn how to build your own Bluetooth control car using an Arduino Nano board, an HC-05 Bluetooth module, and an L298N motor…
Hello, welcome back. In this tutorial, we will learn how to make an IoT based weather monitoring system using Nodemcu and Thingspeak. This project is mainly based on IoT technology….