Hello and welcome back. In this project, we will learn how to make a WIFI control car with the new Blynk app and ESP8266 board. We did this video earlier using the old Blynk app. If you want, you can use this link to visit it. But, the new Blynk app is very popular these …
How to make a WIFI control car with the new Blynk app step by step Read More »
Hello and welcome back. In this tutorial, we will learn how to make a weather monitoring system with the Nodemcu ESP8266 board and the New Blynk app. In this system, we can monitor the light value, Temperature, Humidity, Pressure, and Rainfall. For that, I used the LDR sensor, DHT11 sensor, BMP180 sensor, and Rain sensor. …
Hello and welcome back. In this tutorial, we will learn How to make a Full Home Automation system using the Nodemcu board and the New Blynk app. This system includes Temperature and Humidity monitoring system, GAS level monitoring system, Security system, water level monitoring system, and home appliances controlling system. For that, I used the …
How to make a Full Home Automation System with the New Blynk app Read More »
Hello and welcome back. In this tutorial, we will learn how to make a home automation system using the Nodemcu ESP8266 board and the new Blynk application. I used a two-channel relay module for that. You can use any other relay module. Like 4-way, 8-way, or 16-way. It depends on your job. Also, the appliances …
Hello and welcome back. In this project, we will learn how to make a wifi control tank using the Nodemcu ESP8266 board with the Blynk application. For that, I used the robotic tank kit provided by the OSEPP. But don’t worry you can use any other tank or car. I also published a WIFI control …
How to make a WIFI control tank using Nodemcu ESP8266 with Blynk app Read More »
Hello and welcome back. In this tutorial, we will learn how to set up the new Blynk app step by step. For that, I used an LED blink example. I also published an old Blynk app setup article in a previous article. You can read it using this link. Also, the new Blynk app can …
How to set up the new Blynk app step by step | Nodemcu ESP8266 with Blynk app Read More »
Hello, welcome back. In this tutorial, we will learn how to make a Full home automation system using the Nodemcu ESP8266 and Blynk app. Through this system, we will be able to monitor and control everything in our home. Also, five sensors and a two-channel relay module are mainly used for this system. Therefore, we …
How to make a full home automation system with Nodemcu esp8266 and Blynk app Read More »
Hello, welcome back. In this tutorial, we will learn how to make a Weather monitoring system using the Nodemcu and Blynk app. Also, this project is mainly based on three sensors. That is the rain sensor, DHT11 sensor, and LDR sensor. Through this, we can see factors such as rainfall, temperature, humidity, and amount of …
IoT based weather monitoring system using Nodemcu and Blynk Read More »
Hello, welcome back. In this tutorial, we will learn how to make a Google Assistant home automation project using the Nodemcu ESP8266 board. Also, this tutorial includes how to turn ON and OFF a LED using the Google Assistant. But, once you understand the basic principle here, you can control every electrical appliance in the …
Google Assistant home automation with Nodemcu ESP8266 Read More »
