IoT | Nodemcu ESP8266 | Read
How to make a Laser protection security system with Arduino
Hello and welcome back. In this project, we will learn how to make a Laser protection security system with Arduino. For that, I have mainly used…
Search Results for: resistor
9V 12V 24V to 5V DC-DC Step Down Charger Power Module Dual USB Output
- Product Size: 28 * 32 * 8mm
- Product weight: 5.5g
- Input voltage range: 6-26V
- Output voltage: 5.2V (consider the charge line loss, the output is 5.2V or so, and the load side is about 5V)
TB6600 42/57/86 4.5A 40V Stepper Motor Driver
- single-chip bipolar sine micro-step stepper motor driver
- The new BiCD 0.13 nm process
- up to 50V pressure
- resistance (a +) = 0.4.
- The forward and reverse rotation control
- 5 subdivision mode options (1/1, 1/2, 1/4, 1/8, 1/16,1/32)
16-Channel 12-bit PWM/Servo Driver – I2C interface – PCA9685
- Chipset: PCA9685
- Input Voltage: 2.3V to 5.5V (typically powered by 3.3V or 5V)
- Number of Channels: 16 channels
- PWM Resolution: 12-bit (4096 steps)
Photosensitive brightness resistance sensor module
- Sensor Type: Light Dependent Resistor (LDR)
- Operating Voltage: Typically 3.3V to 5V
- Sensing Method: Variations in resistance based on light intensity
How to use the Arduino UNO R4 MINIMA board step by step
Welcome back! In this tutorial, we will explore how to use the Arduino UNO R4 MINIMA board. For that, I used two simple examples. That’s LED…
How to make a POV display with the Arduino | With PCB
Hello and welcome back. In this project, we will learn how to make a POV display with Arduino. For that, I have used the Arduino Nano…
How to make a water level monitoring system with ESP32 board and Blynk
Hello and welcome back. In this project, we will learn how to make a water level monitoring system with an ESP32 board and the Blynk app….
How to use the A4988 stepper motor driver with 28BYJ-48 Stepper motor
Hello and welcome back. In this tutorial, we will learn how to use the A4988 stepper motor driver step by step. For that, I used a…
