Hello and welcome back. In this project, we will learn how to make a modified Bluetooth control car with Arduino Nano. For that, I have mainly…
Hello and welcome back. In this article, we are gonna introduce a CrowVision 11.6″ IPS Capacitive Touch Screen. We can use this screen for mainly single-board…
Hello and welcome back! In this tutorial, we’ll learn how to use the AS608 Fingerprint sensor with Arduino. For that, I used the Arduino UNO board,…
Hello and welcome back. In this article, we are going to introduce an IOT Smart Home Starter Kit by ACEBOTT STEM Education Company. It is an…
1. Size: 19*18mm (2mm fixing hole)
2. Voltage: 3.3-5V
3. Pressure: 0-40KPa
4. This module adopts a high-precision AD sampling chip and 0-40KPa air pressure sensor. It can connect a 2.5mm soft tube and detect the water level and other air pressure
5. Adopt a 5K ohm resistor bridge sensor, and the specific air pressure value needs calculated.
Hello and welcome back. In this project, we will learn how to make a Laser protection security system with Arduino. For that, I have mainly used…
