Showing 901–920 of 982 resultsSorted by latest
-


€0.19
- Pitch: 5.0mm
- Poles: 2pin
- Rated Voltage: 300V
-


€0.22
- Pitch: 5.0mm
- Poles: 3pin
- Rated Voltage: 300V
-


€1.00
- Voltage consumption: DC4.8-6V
- Output: ≤15mA (5.0)
- Size: 46 x 32 x 16mm ( approximately )
- Color: Blue
-


€0.67
- Operating Frequency: 13.56 MHz
- Communication Interface: SPI (Serial Peripheral Interface)
- Operating Voltage: 3.3V (typically powered by 3.3V microcontrollers or logic level
- converters for 5V compatibility)
-


€4.54
- Microcontroller: RP2040
- Processor: Dual-core Arm Cortex-M0+ running at 133 MHz
- Memory: 264KB of SRAM
- Flash Memory: 2MB (program storage)
-


€2.76
- Chipset: PCA9685
- Input Voltage: 2.3V to 5.5V (typically powered by 3.3V or 5V)
- Number of Channels: 16 channels
- PWM Resolution: 12-bit (4096 steps)
-


€1.86
- Microcontroller: ESP8266
- Wi-Fi Standard: 802.11 b/g/n
- Operating Voltage: 3.3V
- Clock Speed: 80 MHz
-


€1.28
- Sensor Type: Gyroscope and Accelerometer
- Gyroscope Range: ±250, ±500, ±1000, or ±2000 degrees per second (dps)
- Accelerometer Range: ±2g, ±4g, ±8g, or ±16g
- Operating Voltage: Typically 3.3V to 5V
-


€0.64
- Operation voltage range : DC4.5-20v
- Static current : <60uA
- Output level High 3.3v/LOW 0v
- Trigger Mode: Repeatable
-


€1.10
- Model : MG90S
- Operating Voltage: 4.8V – 6.0V
- Stall Torque: 2.2 kg/cm (at 4.8V), 2.5 kg/cm (at 6.0V)
- Speed: 0.10 sec/60° (at 4.8V), 0.08 sec/60° (at 6.0V)
-


€0.17
- Number of Pins: 40
- Pin Spacing: Typically 2.54mm (0.1 inches)
- Pin Type: Male pins
-


€0.15
- Number of Pins: 40
- Pin Spacing: Typically 2.54mm (0.1 inches)
- Pin Type: Male pins
- Row Configuration: Single row
-


€0.69
- The main chip: LM35 temperature sensor
- Working voltage: DC 4-30V
- Linear variation coefficient: +10mv/℃
- Low power consumption is less than: 60uA
-


€2.11
- Microcontroller: ATmega328
- Board Power Supply: 5 – 12 V
- Circuit Operating Voltage: 3.3V
- Digital I/O Pins: 14
-


€0.41
- Sensor Type: Light Dependent Resistor (LDR)
- Operating Voltage: Typically 3.3V to 5V
- Sensing Method: Variations in resistance based on light intensity
-


€0.42
- Sensor Type: Infrared (IR) sensor
- Operating Voltage: Typically 3.3V to 5V
- Detection Method: Reflective detection
-


€0.45
- Test reflection distance: 1mm to 25mm
- The working voltage of 3.3V to 5V
- Output form: digital switch output (0 and 1)
- Has a fixed bolt hole, convenient installation
-


€1.03
- Sensor Type: Infrared (IR) sensors
- Number of Channels: 4
- Working voltage: DC 3.3V-5V
- Working current: try to choose more than 1A power supply
-


€0.27
- Operating voltage:3.3V-5V
- Detection angle : 60 degrees
- Detect wavelength : 760 nm to 1100 nm
-


€0.45
- Number of Pins: 40
- Pin Spacing: Typically 2.54mm (0.1 inches)
- Pin Type: Female pins
- Row Configuration: Single row