SPI TFT LCD Screen Colorful Touch Display Modules | 1.44 1.8 2.0 2.2 2.4 2.8 3.2 3.5 4.0 inch

Description

Thank you for visiting our product page! We strive to provide you with an effortless shopping experience. Our checkout process is simple and offers various shipping options with tracking.

Furthermore, we believe in maximizing the value of your purchase. On this website, you can find detailed instructions on how to use this product and explore various projects we have created using it. These resources are designed to help you make the most of your purchase.

• How to use this product — Click on me
  
• Free projects and tutorials — Click on me

If you have any questions or encounter any issues, our dedicated customer support team is always ready to assist you. Please don’t hesitate to reach out to us through our user-friendly Contact Us page. We are committed to ensuring your complete satisfaction.

Lastly, we highly value your feedback. Once you have experienced our product, we would greatly appreciate it if you could leave a review. Your opinion matters to us!

Thank you for considering our product. We look forward to serving you.

Product details

 

1.44 Inch

• With PCB backplane
• Dot matrix: 128X128!
• Driver: ST7735
• Only 4 IOs can drive

1.8 Inch

• 1.8-inch SPI serial screen with backplane module requires at least 4 IO drivers
• Size: 1.8-inch SPI serial bus
• Resolution: 128*160
• Driver IC: ST7735

The features of this module

•  Support Arduino various MCUs in-line without any wiring
•  Integrated voltage regulator IC, support 5V or 3.3V power supply
•  Onboard level shifting scheme, truly compatible with 5V/3.3V IO level.
•  Support a variety of microcontroller IO connections
•  Integrated SD card expansion circuit,
•  Reserve SPI FLASH font circuit to facilitate extended application

2.0 Inch

• 2.0-inch SPI serial screen with backplane module, at least 4 IO drivers
• Size: 2.0-inch SPI serial bus
• Resolution: 176*220
• Driver IC: ILI9225

The features of this module

•  Support Arduino various MCUs in-line without any wiring
•  Integrated voltage regulator IC, support 5V or 3.3V power supply
•  Onboard level shifting scheme, truly compatible with 5V/3.3V IO level.
•  Support a variety of microcontroller IO connections
•  Integrated backlight control circuit, can control on-off or PWM dimming,
•  Integrated SD card expansion circuit,
•  Reserve SPI FLASH font circuit to facilitate extended application

Pin Description

• 11Pin LCD module interface pin definition:
• Vcc: module power supply positive, can input 5V or 3.3V
• GND: Module power supply negative, ground
• GND: The module power supply is negative, grounded, or can be left floating.
• NC: Hanging
• NC: Hanging
• LED: backlight control pin, connected to high level
• CLK: Serial SPI clock signal
• SDI: serial spi data input signal
• RS: Command (RS = 0) parameter (RS 1) selection
• RST: LCD reset signal
• CS: liquid crystal chip selection signal
• 4 Pin Expansion Pin Interface Pin Definition:
• SD CS: SD card selection signal
• SD_ MOSI: SPI bus MOSI data input
• SD_ MISO: SPI bus MISO data output
• SD_ SCK: SPI bus serial clock signal

2.2 Inch

• Only 5 IO ports (analog SPI)
• direct hardware SPI
• input voltage support 5V/3.3V
• ILI9341 driver
• resolution 240*320

2.4 Inch

• At least 4 IO drivers are required without touch, with a minimum of 9 IO drivers with touch.
• Resolution 240*320

2.8 Inch

• At least 4 IO drivers are required without touch, with a minimum of 9 IO drivers with touch
  Resolution 240*320