RAMPS 1.4 1.5 1.6 Panel Part Motherboard 3D Printers Shield

Description

Thank you for visiting our product page! We strive to provide you with an effortless shopping experience. Our checkout process is simple and offers various shipping options with tracking.

Furthermore, we believe in maximizing the value of your purchase. On this website, you can find detailed instructions on how to use this product and explore various projects we have created using it. These resources are designed to help you make the most of your purchase.

• How to use this product — Click on me
  
• Free projects and tutorials — Click on me

If you have any questions or encounter any issues, our dedicated customer support team is always ready to assist you. Please don’t hesitate to reach out to us through our user-friendly Contact Us page. We are committed to ensuring your complete satisfaction.

Lastly, we highly value your feedback. Once you have experienced our product, we would greatly appreciate it if you could leave a review. Your opinion matters to us!

Thank you for considering our product. We look forward to serving you.

Product details

Ramps 1.4

• It has Cartesian robots and regulations for the extruder.
• Extended to control other accessories.
• Heater / MOSFET outputs and three fan thermistor circuits.
• Integration of additional security 5A and component protection
• Control of additional heating bed 11A fuse
• Suitable for 5 Pololu stepper driver board
• Pololu board pin sockets so can be easily replaced or removed for future designs.
• I2C and SPI pinsare  left for future expansion.
• Hooked into all MOSFET PWM pin versatility.
• Servo servo-type connector is used to connect to the end stop, the moto,r ,and the light-emitting diodes. These connectors are gold-plated, rated current of 3A, very compact.
• The SD card to add – is now available from the Kliment – Sdramps
• LED indicates when the heater output

Ramps 1.5

• Support motor drivers: support A4988 DRV8825 and other motor drivers(support five motor drivers Simultaneously)
• Input voltage: 12V
• Power: 200W
• Patch MOS tube: B55NF06
• It can be extended to LCD and other parts.
• There are heater and fan MOSFET outputs and 3 thermistor interfaces
• 5A additional security and component protection fusion
• The heated bed controls additional 11A fuses
• Applied to 5 Pololu stepper drive board
• The design of the Pololu plate pin socket can be easily replaced or removed for future design
• I2C and SPI pins are available for future expansion
• Servo connectors are used for connecting limit stops, motors and light-emitting diodes.
• These connectors are gold-plated and have a rated current of 3A, which is very compact.
• The LED will light when the heater has output
• choose 2 motors to connect to Z Prusa Mendell

Ramps 1.6

• Ramps 1.6 is optimized and launched based on Ramps 1.4 & Ramps 1.5
• The Structure is almost the same as Ramps 1.5, the difference is Ramps 1.6 have new 2pin connectors, which are more simple and convenient to connect, also will not be burnt easily, what’s more, Ramps 1.6 have a good Heatsink above the MOS tube in order to give a better function to heat dissipation.
• Besides, the Power of Ramp 1.6 is larger than Ramp 1.5, the largest power will be up to 270W, and Ramp 1.5 just can be up to 200W, or smaller than 200W.
• It can be extended to LCD and other parts.
• There are heater and fan MOSFET outputs and 3 thermistor interfaces
• 5A additional security and component protection fusion
• The heated bed controls additional 11A fuses
• Applied to 5 stepper drive board
• The design of the plate pin socket can be easily replaced or removed for future design
• I2C and SPI pins are available for future expansion
• Servo connectors are used for connecting limit stops, motors and light-emitting diodes.
• These connectors are gold-plated and have a rated current of 3A, which is very compact.
• The LED will light when the heater has output
• choose 2 motors to connect to Z Prusa Mendell