View cart “Arduino Nano Compatible board With Cable | ATmega328P” has been added to your cart.
Showing 1–20 of 35 results
-
Rated 0 out of 5
$3.42
- DC 5V-12V
- 1 analog input(3.2V max input)
- a Micro USB connection
- Compatible with Arduino
- D1 R32=WiFi+Bluetooth+UNO
-
Rated 0 out of 5
$11.58
- Type: Voltage Regulator
- DC holder power supply voltage: 7-15V
- Operating voltage: 5V
- FLASH memory capacity: 32Mbit
- ICSP interface
- Built-in WiFi antenna
-
Rated 0 out of 5
$4.47
- Supply Voltage: 6~9V recommended
- Type: Logic ICs
- MCU: ATmega328
- WiFi MCU: ESP8266
- ch340g usb – converter.
- PinOut Uno: Uno R3
-
Rated 0 out of 5
$5.57
- Using this Ethernet shield, can one of your r3 boards be used to connect to the Internet
- It can be used as a server or client.
- The board is directly plugged and does not need to be soldered.
- Controller: w5100.
- This is the latest version of Ethernet Shield.
-
Rated 0 out of 5
$9.91
- Main control chip: ATmega2560
- Driver chip: CH340
- Power output: 5V/800mA
- Power input: 5V
- External power input (VIN): 7-9V
- Power consumption: 5V 220mA
- Interface: TYPE-C/MICRO
- Main control chip crystal oscillator: 16M
-
Rated 0 out of 5
$4.78
- This is a USB Host expansion board that needs to be used with the Arduino main control board to use
- Support UNO, MEGA, and most Ardu host boards
- The shield board currently supports the following device categories.
- HID devices, such as keyboard, mouse, joystick, etc
-
Rated 0 out of 5
$10.81
- Using dual-core Xtensa 832-bit LX6 microcontroller. Integrated SPI flash memory 32 Mbit\SRAM 520 KB
- Support TCP server, TCP client, UDP server, UDP client working mode
- Supports four data ports of serial port, wifl, Ethernet and Bluetooth to be combined in pairs, and data is transparently transmitted
-
Rated 0 out of 5
$1.79
SOC Feature
- Built-in Tensilica L106 ultra-low power 32-bit microprocessor, clocked at 80MHz and
- 160MHz support RTOS
- Built-in TCP / IP protocol stack
- Built-in 1 channel 10 bit precision ADC
Wi-Fi features
- Supports 802.11 b / g / n / e / i
- Support Station, SoftAP, SoftAP + STA mode
- Support for Wi-Fi Direct (P2P)
- Supports CCMP (CBC-MAC, counter mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4),
-
Rated 0 out of 5
$1.34
- Communication protocol: Complete 802.11b/g/N WiFi Soc module
- Frequency Range: 2400-2483.5mhz
- Chip solution: ESP8266
- Packaging form: SMD-22
-
Rated 0 out of 5
$4.26
- 18650 charging system integration.
- Indication LED (green means full of red means · Charging) Charge and work can be done at the same time.
- 1 switch control power supply.
-
Rated 0 out of 5
$1.91
- Based on ESP-8266EX
- rduino compatibility, programming using the rduino IDE
- 11 XI/O pin
- 1XADC pin (input 0-3.3V)
-
Rated 0 out of 5
$2.11
WiFi:
• 802.11 b/g/n/e/i
• 802.11 n (2.4 GHz) with speeds up to 150 Mbps
• 802.11 e: QoS mechanism for wireless multimedia technology
Bluetooth-compatible-compatible:
•Bluetooth-compatible-compatible v4.2 full standard, including traditional Bluetooth-compatible-compatible (BR/EDR) and Bluetooth-compatible-compatible Low Energy (BLE)
• Supports standard Class-1, Class-2 and Class-3 without external power amplifier
• Enhanced precision power control
-
Rated 0 out of 5
$2.11
- Module size: about 25.5 * 18.0 * 3.1mm/1.00 * 0.70 * 0.12inch
- Antenna form: default onboard antenna compatible with IPEX base
- Spectrum range: 2400-2483.5MHz
- Working environment: -40 ° C~85C
-
Rated 0 out of 5
$1.41
- Communication protocol: Complete 802.11b/g/N WiFi Soc module
- Frequency Range: 2400-2483.5mhz
- Chip solution: ESP8266
- Packaging form: SMD-16
- Size(mm): 24.0*16.0*3.0
-
Rated 0 out of 5
$1.41
- Communication protocol: Complete 802.11b/g/N WiFi Soc module
- Frequency Range: 2400-2483.5mhz
- Chip solution: ESP8266
- Packaging form: SMD-22
- Size(mm): 24.0*16.0*3.0
- Series Rate: 4Mbps
-
Rated 0 out of 5
$1.31
- Wireless standard: 802.11 b / g / n
- Frequency range: 2.4GHz~2.5GHz(2400M ~ 2483.5M)
- Data interface: UART / HSPI / I2C / I2S / IR Remote Contorl / GPIO / PWM
- Operating voltage: 3.0 ~ 3.6v (Suggest 3.3v)
- Working current: average 80mA
-
Rated 0 out of 5
$1.31
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
-
Rated 0 out of 5
$5.14
- Microcontroller: RP2040
- Processor: Dual-core Arm Cortex-M0+ running at 133 MHz
- Memory: 264KB of SRAM
- Flash Memory: 2MB (program storage)
-
Rated 0 out of 5
$2.11
- Microcontroller: ESP8266
- Wi-Fi Standard: 802.11 b/g/n
- Operating Voltage: 3.3V
- Clock Speed: 80 MHz
-
Rated 0 out of 5
$2.39
- Microcontroller: ATmega328
- Board Power Supply: 5 – 12 V
- Circuit Operating Voltage: 3.3V
- Digital I/O Pins: 14