How to make an LED ring chaser using the Attiny85 Microcontroller
Hello and welcome back! In this project, we will learn how to make an LED ring chaser using the Attiny85 microcontroller. I used three 74HC595 shift registers to control 24…
Hello and welcome back! In this project, we will learn how to make an LED ring chaser using the Attiny85 microcontroller. I used three 74HC595 shift registers to control 24…
Hello and welcome back. In this project, we will learn how to make a plant watering system using the Arduino UNO R4 WIFI board. I’ve used the plant watering kit…
Hello and welcome back. In this tutorial, we will learn how to use the 5-way Flame sensor module with an Arduino. For this project, I have used 5 LEDs to…
Hello and welcome back! In this article, we will introduce a very interesting robot called CuteRobot, which is provided by ELECFREAKS. It’s mainly based on the Microbit, so it is…
Hello and welcome back! In this tutorial, we’ll learn how to use a PIR motion sensor with the MicroBit V2 board. This project is not only simple but also a…
Hello and welcome back. In this project, we will learn how to make a line follower robot without a development board. I have used the LM393 Voltage Dual Comparator as…
Hello and welcome back. In this article, we are going to introduce a Mini PC case powered by the Raspberry Pi 5 board. Provided by SunFounder, it’s named the Pironman…
Hello and welcome back. In this project, we will learn how to make a voice-controlled room lighting system using the ESP32 DEVKIT V1 board. We have used the Bluetooth technology…
Hell and welcome back. In this article, I’m going to introduce the CrowView Note portable screen. It’s like a laptop with an inbuilt keyboard, touchpad, speakers, and microphone. You can…