DT33B Digital multimeter backlight display with buzzer
- LCD display size: 49x16mm
- LCD maximum display value: 1999
- Low voltage symbol display: Yes
- Overload protection: Yes
- Diode detection: Yes, displaying approximate voltage drop
Search Results for: Buzzer
1-8S Lipo Li-ion Fe Battery Voltage 2IN1 Indicator Tester |Low Voltage Buzzer Alarm
- For 1S-8S lithium battery detection
- Voltage detection accuracy: ± 0.01V.
- Group voltage display range: 0.5V~4.5V
- Total voltage display range: 0.5V~36V
5v Active Buzzer Magnetic Long Continous Beep Tone
- Operating Voltage: 4.5V – 5.5V
- Rated Voltage: 5V
- Sound Output: Continuous beep
- Operating Current: <25mA
Flame sensor with Arduino | Flame sensor with led indicator and buzzer
Hello, welcome back. In this tutorial, we will learn what is the flame sensor and how to work with an Arduino. These types of sensors are…
How to make buzzer sound in Arduino | Step by step instructions
Hello guys, welcome back. Today we are going to talk about how to make a buzzer sound in Arduino. Also, with this Arduino, you can create any…
How to Make a DIY Keypad Door Lock System with Arduino Nano and Solenoid Lock
Hello and welcome back! In this project, we’ll learn how to make a simple door lock system using a 4×4 keypad module. To control everything, I…
Arduino-Based Automatic Gate with PIR Sensor & Servo Motor
Hello and welcome back! In this project, we will learn how to make an automatic gate control system using Arduino. For this, I have mainly used…
How to make a Smart Level Indicator with Raspberry Pi Pico and MPU6050
Hello and welcome back. In this project, we will learn how to make a DIY leveling tool using a Raspberry Pi Pico. For that, I mainly…
How to Make an Angle Detection Box Using Arduino Nano and Tilt Sensor | Step by Step
Hello and welcome back! In this project, we will learn how to make a DIY angle detection box using Arduino Nano. The main part of this…