12v driver board
- Driver: IRF9540
- Operating voltage: 5V
- Switching Capacity: 10A
Search Results for: 12v driver
ULN2003 five-wire four-phase stepper motor driver board
- Onboard ULN2003A motor driver chip
- All the pins of the chip have been drawn out, which is convenient for connection and use
- pin 5-12V power supply
- Onboard 4-way signal indicator
L9110S four-way Drive DC motor driver board
- The motor drive module itself comes with a four-way L9110S chip.
- Module power supply voltage: 2.5-12V
- suitable for the motor range: motor operating voltage between 2.5v-12v, large operating current 0.8A, the current market intelligent car voltage and current are within this range
- can drive 4 DC motors, or 2 4-wire 2-phase stepper motors at the same time.
L298P PWM Speed Controller Dual High-Power H-bridge Driver
- The logical part of the input voltage VD: 5V
- drivenpart of the inputvoltageVS: VINInput6.5 ~ 12V, PWRIN4.8 ~ 35Vinput
- The logical part of the workcurrentIss: <36mA
- driven part of the operating current: <2A
- maximum power dissipation: 25W (T = 75Celsius)
A4988/DRV8825 3D Printer Stepper Motor Driver
- You can use A4988 / DRV8825, Pay attention to the direction of insertion, as this may burn the drive.
- jumpers hit the ON DP position indicating 16 segments (4988) or 32 segments (8825).
- Jm connecting the motor.
V3 Engraver Drive Shield | V3 CNC shield | Not include Drivers
- Voltage: 12V DC to 36V
- 4-Axis support
- Uses removable A4988 or DRV8825 compatible stepper drivers
- 2 x End stops for each axis (6 in total)
HG7881CP Motor Driver Module | 2 Channel Motor Driver Board
- Driver IC: HG7881
- Input voltage: 2.5-12V
- Output current: 800mA
- PCB dimensions: 29.2 (mm) x23 (mm)
High-power ULN2003 Stepper Motor Driver Board
- Driver IC: ULN2003 high-power Darlington chip
- Input voltage: 5v – 12v
- Increased output expansion interface
How to use the A4988 stepper motor driver with 28BYJ-48 Stepper motor
Hello and welcome back. In this tutorial, we will learn how to use the A4988 stepper motor driver step by step. For that, I used a…